Floor Sanding – Why You Should Not Do It Yourself

Floor sanding is the procedure of removing all the hardtop surfaces of a hardwood floor by powerful sanding using abrasive substances. The process can either be used to reface worn and faded flooring or give the floor a new surface. If you want to refinish your entire floor, it is best to hire a professional floor sanding Adelaide service. Homeowners can also do the sanding themselves if they have the right tools and know-how for the job. However, sanding your hardwood floors by yourself poses certain dangers, which you must know about before beginning. Here are some of these dangers:

floor sanding AdelaideA sanding screen is essential if you are floor sanding Adelaide by hand. A sanding screen will help protect you from all the flying dust particles that can collect when you use your hands. You will also need a power washer to spray the sandpaper onto the floor. Power sprayers have a huge capacity and can blast sandpaper in a spray-and-tear motion. Before you spray your floor, make sure that the floor is clean; otherwise, the finish will not hold well and will get very dirty very fast.

You must start sanding the floor in the same direction as the grain of the wood. It will ensure that all the boards are completely even after the sanding sequence is completed. Start with one side of the room and work your way slowly across the entire floor, paying special attention to the joints and edges of the room. Once you have finished sanding the floor to the desired finish, you can then apply the new finish to the whole floor.

Never use water-based floor polishes or cleaners on the floor before floor sanding Adelaide. Water-based cleaners or polishes are not suitable for sanded wood because they will not penetrate the finish. As a result, they will only cause damage to the flooring. Instead of using water, you should use mineral spirits or urethane as a floor finish for all types of wood.

When you are finished, you must clean up all the dust that is found on the floor. Use a vacuum cleaner with a beater bar to remove the dust from the entire floor. If you plan to use a dust extractor, it is advisable to use one with a brush attachment for easy cleaning up.

You can hire a professional floor refinisher to get the job done or if you feel like you can do it yourself, start sanding the floor before buying the big machine. The latter option is much cheaper, and you won’t need to wait for the machine to arrive. Just make sure that you buy an edging sander appropriate for the type of floor you are working on. Also, ensure that you pick a big machine that will fit your floor size.